How many times have you had a customer say "Do you have anything that will automatically fill fluid, or set the DF-50 to go off and on". We have the answer to your customers needs!! |
||||
AUTO FILL |
AUTO FILL & TIMER |
|||
|
|
|||
The auto fill system will draw fluid up 20 ft. from a reservoir or pump up 40 vertical ft. from a reservoir and maintain the fluid level in a DF-50. Remove the old filler cap and replace with the auto fill cap, back twist once or twice to keep the lines from getting tangled and then screw on. Feed the inlet tube through the cap on your reservoir and place the prefilter on the tube end. Connect the power cord provided with the auto fill unit to the auto fill unit and then to the DF-50. Use the power cord that came with your DF-50 to connect the auto fill unit to the proper power source. The pump is a slow running low volume pump that fills the machine very slowly. It will maintain the level in the fogger at about 3/4 full. |
This timer is used to set the level of smoke in an enclosed environment and maintain that level 24 hr's a day. The on and off cycle times are set by turning the inner red (on) and outer yellow (off) dial to the appropriate on and off period. Full dial rotation provides a 1/2 hr of either an on or off setting. This cycle will then repeat indefinitely. To change factory settings: Turn orange inner dial to set "on" times. Turn yellow outer dial to set "off" times. The lower right "Adjust scale" selects time multiple (.5 ; 1 ; 5 ; 10 .) Factory setting is .5 or 1/2 The lower left "Adjust scale" sets time duration for full scale. (min. ; hr ; 10hr) Factory setting is hr Use small flat head screw driver to adjust these settings. |
|||
SUGGESTED RETAIL AUTO FILL $795 |
SUGGESTED RETAIL AUTO FILL TIMER COMBO $1,195 |
SUGGESTED RETAIL AUTO TIMER $495 |
||
AUTOCOM1.DOC